The Boat

Katla is a 26ft Wooden Gaff Cutter built by Martin Lund in 2006 of the Wynfall design by Mark Smaalders.

She is
Carvel built of Mahogany planks over sawn Pine frames. The planks are fastened with Stainless Steel (316) screws and the frames are glued and fastened using wooden pegs and Galvanised bolts. Before painting, all wood was treated with a mixture of Turpentine, Pine Oil and Cuprinol.

The deck is Marine Plywood epoxy laminated and covered with chopped strand mat in epoxy resin. The Spar is of Siberian Larch. The rudder is transom hung on Stainless Steel (316) pintles.

The ballast keel is a Stainless Steel (316) box of 6mm sides and bottom, which has lead ingots in it. The lead is then laid in poliester resin inside. Five Stainless Steel (316) tubes are welded inside vertically through the keel box, where the keel bolts go through, meaning the box is completely sealed from seawater. There are 5 Stainless Steel (316) keelbolts to carry 1.5 tonnes. It is a massively strong construction.

There are no through hull fittings and a water tight bulkhead under the cockpit.

The broker described her as: 'A sturdy and salty little lady. Which will appeal to traditionalists on a budget'.

There is no inboard engine, no toilet, no electronics, and traditional (Block & Tackle) rigging (no winches).

LOA: 26' - 5"
LWL: 23' - 10"
BEAM: 8' - 10"
DRAFT: 3' - 10"
DISP: 9500 lbs
BALLAST: 3300 lbs
D/L: 343
SAIL AREA: 466 sq. ft.

The Trip

View Katla

Friday, 30 October 2009

Almost Ready ...

Ok, another post I know you have all been waiting for... So whats new?

Well, I am still moored alongside James & 'the Taj'. I have been generally passing the time playing guitar, reading and some socialising. That and doing small jobs on the boat. Today Jess' dad arrives and I thought it only proper that I finally get my hair cut, so its no more looking like Earl and back to Prison grade one.

She is generally all sorted out with only a few remaining jobs that are purely cosmetic and can be done at my leisure while at anchor. I actually enjoy working on the boat and learning new skills, something I wasn't really able (or needed) to do on Doris.

Big changes include, getting the two 7ah batteries (yes thats 7ah and not a typo - they are tiny!) charged up using the small solar panel. I now have internal lights (LED - my anchor light I bought out with me) and can now charge up rechargeable batteries and run GPS etc In fact the only thing I can't do is charge my laptop. Is spending about $1000us just to charge my laptop really worth it? hmmn?...

I have just got my Mainsail and Staysail back from the sail loft after having a 3rd reef put in the main and a deep reef in the Staysail ($300us), so I should now be fine in a storm. I'm still interested in either making or 'obtaining' a proper Storm Jib and Trysail but they can wait for now. I have been all over the rigging and replaced everything that looked vaguely dodgy and I think the rig is now 'bomb proof'. I do however, need to 'obtain' some blocks for the running backstays. They are not needed due to the oversize rear stays but would be good to have in a real blow or even in case of a shroud breaking at sea.

I have also decided to take the plunge and (insanely) swapped my outboard engine for a large oar (sweep) from Veracity. So now I am engine-less and need to perfect the art of sculling & rowing Katla pretty quickly! I have also decided to prepare and keep ready a very long length of warp so that in the event of becoming becalmed in any current I can drop anchor in really deep water especially close to land such as between the islands.

I know its an inane swap, but I hated the look of it bolted on the back and it had seen better days. It will run again I'm sure, but if I ever really needed it in a hurry I couldn't fully rely on it and sailing with an unreliable engine is almost as bad as sailing without one anyway in my head. If I feel naked without an engine I will pick up a sparkly new one along the way. It will be a good challenge learning to sail 'as God intended', providing I don't end up over a reef or generally bouncing off other boats in the busy anchorages.

So, now Katla is basically ready (not sure I am) and the plan is to set off shortly, first retracing my steps towards St Martin, via Nevis and Saba etc... After that who knows where, the BVIs or back here for Christmas with my fellow Sea Pikeys.

The season is just starting and the anchorage is slowly getting busier. It will be good to have a few people around but in some ways its a shame the tranquillity is going to be shattered. Maybe Ill search for my own little anchorage somewhere off the beaten track ... who knows.

Stay tuned ...

Friday, 16 October 2009

DORIS SOLD

My bank balance would seem to suggest that I am no longer the proud owner of DORIS and the sale has completed.

Yeah baby! - Where's the nearest chandlers!
'I will control myself, I will control myself'....

Tuesday, 6 October 2009

Alongside the Taj

Well after getting a bit of an ear bashing from several people here it is at last – a new blog post! Thanks to Veracity for the spare volts…

I am still in English harbour moored up alongside James and his steel yacht we call ‘The Taj’, me being his ‘Walla’.

Since arriving, I have been spending the days mostly working on the boat and learning a range of new skills including working with wood, rope, leather and canvas.

The first job was to build a new set of Gaff jaws to at least make the boat sailable again. After a week helping James & Marcus in Sprouts woodshop they were complete and I even got paid a ‘wage’ for helping out on other jobs.

Other completed tasks include painting the coach roof and decks white so you don’t suffer third degree burns (she also looks 'real purdy' now), various sail repairs and rigging modifications.

Hopefully the sale completion of DORIS will go through on the 16th and I will have some spare money to install some batteries and finally get some power onboard. I have to say though, life by paraffin lamp is quite pleasant and simple.

I still haven’t got the outboard engine working mainly because I hate it. It looks like a huge cancer hanging off the ass of my boat, but I guess it makes sense to keep it.

Jobs (projects) yet to do include:

Build a wooden dinghy that stows on the coach roof

A sculling oar so that it may be possible to loose the outboard

Add a reef to my Staysail

Make some proper storm sails

A topsail made from an old wind surfing rig

Anyway, that’s me for now …

Boo & Katla.